Airtools

  1. Is it possible to regulate the torque and to set it to a certain value in nm?
  2. What is the diameter and the pitch of the shaft?
  3. What is the maximum drilling depth of the spot weld drill?
  4. What is the difference between the drilling point and the contrast arch ?
  5. What is the diameter of the cutter?
  • Is it possible to regulate the torque and to set it to a certain value in nm?
    The torque can be regulated according to the positions indicated on the tool ( for example for the item 940 CN: 0 (0) represents the minimum value of torque ad (5) the maximum) but it cannot be set , in fact the positions don’t represent a specific value in Nm.
    | Top |
  • What is the diameter and the pitch of the shaft?
    • Name
    Diameter
    PITCH
    Grinder 921 A1-A2
    3/8”
    24 Whitworth
    Drill 916 BN-CN-DN-E
    3/8”
    24 Whitworth
    Sander 920 D
    5/8”
    11 Whitworth
    Sander 920 E
    5/8”
    11 Whitworth
    Sander 920 F
    7/16”
    20 Whitworth
    | Top |
  • What is the maximum drilling depth of the spot weld drill?
    The maximum drilling depth is 0,4-0,5 mm.
    | Top |
  • What is the distance between the drilling point and the contrast arch ?
    The distance is 40mm.
    | Top |
  • What is the diameter of the cutter?
    The diameter is 8-8,2 mm.
    | Top |